Technical information

 

This lamp on a stand made by "Lamp in a Box" in the USA.

 

 

- Size: 20" × 7" (50cm x 18cm)
- High-res printed shade with a fabric trim
- NB! Requires 13 Watt compact fluorescent or 60 Watt regular incandescent or LED equivalent bulb (not included)
- Steel lamp base with high quality finish
- Type A plug with 2 flat pins - supported in the USA and Canada
- 100 – 127 V

 

 

This unique table lamp stand features a steel base that comes

with a classy finish. 

 

 

NB! Please note that these lamps come with a power cord adaptor type that is supported only in the USA and Canada (Type A plug with 2x flat pins) - Not Suitable for EU plugs.

 

 

 

Polyester fabric trim

Polyester fabric trimming that allows contrasting and colorful high-resolution prints.

 

 

All over print

Design can be applied on the outer side (360°) of the lamp shade.

Warm light

Shade ensures warm and cozy lighting for every time of the day.

US/CA supported plug

Stick lamp comes with a type-A plug used in the United States and Canada.

Care instructions

The lamp comes inside of the box with the shade packed upside down. When you remove it from the box (following the instructions printed on the inner flaps), you remove the plastic ring, remove the shade, turn the shade right side up and then secure it to the socket with the plastic ring again.

Clean by wiping with a soft, damp cloth.

Technology & Inks

The print provider uses technology that guarantees fade-resistant prints. Printers are equipped with inks that are eco-friendly with low VOC and are GREENGUARD Gold certified. The inks used are archival, meaning that the print will be more resistant to wearing and tearing.

Quality control

Lamp bases are imported and upon unpacking the shipment, every single base gets carefully checked for any physical defects. Then print provider installs a light bulb, plugs it in and inspects the on-off pull chain and any other electrical problem. The lampshades are inspected 3 separate times: first after printing, secondly after being constructed into a lampshade (and the fabric trim added) and thirdly before packing into its individual box.

Packaging control

Re-shippable tall lamp boxes have been developed in conjunction with the UPS testing lab for both keeping the lamps safe at and the same time making the box as compact as possible. Boxes are made of partly recycled board, they have instructions printed on the box itself to avoid printing an extra instruction sheet, and they can be re-used as waste-paper baskets. In addition, they come with a pop-up carrying handle for easy transportation.